Pipe Welding: What You Need To Be A Valuable Employee

A gasoline powered welder is the best choice if money is your biggest consideration. A used welder (in my opinion makes a lot of sense if you find a garage queen. This article is not about brands, but in my opinion, I would stick with Lincoln or Miller for three reasons.

For instance, a welder who has passed the test of TIG on 2 inch schedule 80 pipe in a 6G position can weld 1 inch and grater diameter pipe. It can go up to 436” thick and then a welder can weld in all positions. Similarly, a welder having passed the test of 6” schedule 40 in a 6G position is qualified to weld till .560” thick and it can go down up to 2.875” pipe diameter.

As you can tell, we recommend you choose a top welding school. Because their programs are narrowly tailored to welding, you will most often get a higher quality education. You will also get the benefit of working on some more refined programs like tig welding or click here. For these reasons, we suggest you look at the best schools first.

Pipe / rig welders (pipe welders with their own welding in their truck) are making about $70 an hour is North Dakota. It’s hard to find statistics specifically about pipe welders. However, if you can weld pipe well, and you’re willing to go where the work is, you’ll have a busy, well paid career. Why?

Although there are some pretty snazzy modern stick welders out on the pipeline, you’ll also find the Lincoln SA200 Pipeliner. You’ll see some made in the 60s and 50s, and once in a great while, as far back as 1939. Why? The Pipeliner SA200 welders are great machines. Heavy copper windings make for a smooth arc. They are built like a brick porta-potty, so they run and run.

One trick you can apply with this type of rod is this: The polarity can be switched when welding this rod allowing for less penetration or digging as it is being welded. Sometimes on thin metal or metal that cannot hold up to a great deal of scouring effort by the norm of these rods can be overcome by this little trick. Make the ground positive and the hot lead negative (reverse polarity). You will find that the sound is a bit different while welding than it normally would be. You will also find that the welding rod does not have the tendency to dig or penetrate as much.

That’s a bummer (if you are a pipe welder or want to be one) because it will mean a lot of work for a lot of highly paid pipe welders. However, the best way to have a career is to plan it – the delay of a year will give you time to get ready to make bank on the pipeline.

The market welder qualification asks for a combo pipe welder. It is always beneficial to enhance your skill to make it to the best possible option. Obviously, if you carry both the skills of welding a TIG root as well as a hot pass followed by an E7018 stick fill and cap, it will be easy for you to get the job. The combo welders are able to weld with several welding processes. Companies choose TIG welding for the root and hot pass and stick welding for the rest of the pipe. Requirement can vary; therefore, your skills should be compatible enough to deal with the conditions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts

Categories

Categories

Pipe Welding: What You Need To Be A Valuable Employee

Contact Us

arab-nation Gutters
4538 Bernardo Street, New Albany, IN, 47150

Call Us: 812-948-2897
http://arab-nation.com

Address
FREE CONSULTATION
Consultation

GET A FREE ESTIMATE

Contact Form